X-Git-Url: https://git.josue.xyz/?p=VSoRC%2F.git;a=blobdiff_plain;f=node_modules%2Fnode-pty%2Fbuild%2FMakefile;fp=node_modules%2Fnode-pty%2Fbuild%2FMakefile;h=8bea2538117a93b80b559974b896c50b8b7a7907;hp=0000000000000000000000000000000000000000;hb=e79e4a5a87f3e84f7c1777f10a954453a69bf540;hpb=4339da12467b75fb8b6ca831f4bf0081c485ed2c

diff --git a/node_modules/node-pty/build/Makefile b/node_modules/node-pty/build/Makefile
new file mode 100644
index 0000000..8bea253
--- /dev/null
+++ b/node_modules/node-pty/build/Makefile
@@ -0,0 +1,324 @@
+# We borrow heavily from the kernel build setup, though we are simpler since
+# we don't have Kconfig tweaking settings on us.
+
+# The implicit make rules have it looking for RCS files, among other things.
+# We instead explicitly write all the rules we care about.
+# It's even quicker (saves ~200ms) to pass -r on the command line.
+MAKEFLAGS=-r
+
+# The source directory tree.
+srcdir := ..
+abs_srcdir := $(abspath $(srcdir))
+
+# The name of the builddir.
+builddir_name ?= .
+
+# The V=1 flag on command line makes us verbosely print command lines.
+ifdef V
+  quiet=
+else
+  quiet=quiet_
+endif
+
+# Specify BUILDTYPE=Release on the command line for a release build.
+BUILDTYPE ?= Release
+
+# Directory all our build output goes into.
+# Note that this must be two directories beneath src/ for unit tests to pass,
+# as they reach into the src/ directory for data with relative paths.
+builddir ?= $(builddir_name)/$(BUILDTYPE)
+abs_builddir := $(abspath $(builddir))
+depsdir := $(builddir)/.deps
+
+# Object output directory.
+obj := $(builddir)/obj
+abs_obj := $(abspath $(obj))
+
+# We build up a list of every single one of the targets so we can slurp in the
+# generated dependency rule Makefiles in one pass.
+all_deps :=
+
+
+
+CC.target ?= $(CC)
+CFLAGS.target ?= $(CFLAGS)
+CXX.target ?= $(CXX)
+CXXFLAGS.target ?= $(CXXFLAGS) $(CPPFLAGS)
+LINK.target ?= $(LINK)
+LDFLAGS.target ?= $(LDFLAGS)
+AR.target ?= $(AR)
+
+# C++ apps need to be linked with g++.
+LINK ?= $(CXX.target)
+
+# TODO(evan): move all cross-compilation logic to gyp-time so we don't need
+# to replicate this environment fallback in make as well.
+CC.host ?= gcc
+CFLAGS.host ?=
+CXX.host ?= g++
+CXXFLAGS.host ?=
+LINK.host ?= $(CXX.host)
+LDFLAGS.host ?=
+AR.host ?= ar
+
+# Define a dir function that can handle spaces.
+# http://www.gnu.org/software/make/manual/make.html#Syntax-of-Functions
+# "leading spaces cannot appear in the text of the first argument as written.
+# These characters can be put into the argument value by variable substitution."
+empty :=
+space := $(empty) $(empty)
+
+# http://stackoverflow.com/questions/1189781/using-make-dir-or-notdir-on-a-path-with-spaces
+replace_spaces = $(subst $(space),?,$1)
+unreplace_spaces = $(subst ?,$(space),$1)
+dirx = $(call unreplace_spaces,$(dir $(call replace_spaces,$1)))
+
+# Flags to make gcc output dependency info.  Note that you need to be
+# careful here to use the flags that ccache and distcc can understand.
+# We write to a dep file on the side first and then rename at the end
+# so we can't end up with a broken dep file.
+depfile = $(depsdir)/$(call replace_spaces,$@).d
+DEPFLAGS = -MMD -MF $(depfile).raw
+
+# We have to fixup the deps output in a few ways.
+# (1) the file output should mention the proper .o file.
+# ccache or distcc lose the path to the target, so we convert a rule of
+# the form:
+#   foobar.o: DEP1 DEP2
+# into
+#   path/to/foobar.o: DEP1 DEP2
+# (2) we want missing files not to cause us to fail to build.
+# We want to rewrite
+#   foobar.o: DEP1 DEP2 \
+#               DEP3
+# to
+#   DEP1:
+#   DEP2:
+#   DEP3:
+# so if the files are missing, they're just considered phony rules.
+# We have to do some pretty insane escaping to get those backslashes
+# and dollar signs past make, the shell, and sed at the same time.
+# Doesn't work with spaces, but that's fine: .d files have spaces in
+# their names replaced with other characters.
+define fixup_dep
+# The depfile may not exist if the input file didn't have any #includes.
+touch $(depfile).raw
+# Fixup path as in (1).
+sed -e "s|^$(notdir $@)|$@|" $(depfile).raw >> $(depfile)
+# Add extra rules as in (2).
+# We remove slashes and replace spaces with new lines;
+# remove blank lines;
+# delete the first line and append a colon to the remaining lines.
+sed -e 's|\\||' -e 'y| |\n|' $(depfile).raw |\
+  grep -v '^$$'                             |\
+  sed -e 1d -e 's|$$|:|'                     \
+    >> $(depfile)
+rm $(depfile).raw
+endef
+
+# Command definitions:
+# - cmd_foo is the actual command to run;
+# - quiet_cmd_foo is the brief-output summary of the command.
+
+quiet_cmd_cc = CC($(TOOLSET)) $@
+cmd_cc = $(CC.$(TOOLSET)) $(GYP_CFLAGS) $(DEPFLAGS) $(CFLAGS.$(TOOLSET)) -c -o $@ $<
+
+quiet_cmd_cxx = CXX($(TOOLSET)) $@
+cmd_cxx = $(CXX.$(TOOLSET)) $(GYP_CXXFLAGS) $(DEPFLAGS) $(CXXFLAGS.$(TOOLSET)) -c -o $@ $<
+
+quiet_cmd_touch = TOUCH $@
+cmd_touch = touch $@
+
+quiet_cmd_copy = COPY $@
+# send stderr to /dev/null to ignore messages when linking directories.
+cmd_copy = ln -f "$<" "$@" 2>/dev/null || (rm -rf "$@" && cp -af "$<" "$@")
+
+quiet_cmd_alink = AR($(TOOLSET)) $@
+cmd_alink = rm -f $@ && $(AR.$(TOOLSET)) crs $@ $(filter %.o,$^)
+
+quiet_cmd_alink_thin = AR($(TOOLSET)) $@
+cmd_alink_thin = rm -f $@ && $(AR.$(TOOLSET)) crsT $@ $(filter %.o,$^)
+
+# Due to circular dependencies between libraries :(, we wrap the
+# special "figure out circular dependencies" flags around the entire
+# input list during linking.
+quiet_cmd_link = LINK($(TOOLSET)) $@
+cmd_link = $(LINK.$(TOOLSET)) $(GYP_LDFLAGS) $(LDFLAGS.$(TOOLSET)) -o $@ -Wl,--start-group $(LD_INPUTS) -Wl,--end-group $(LIBS)
+
+# We support two kinds of shared objects (.so):
+# 1) shared_library, which is just bundling together many dependent libraries
+# into a link line.
+# 2) loadable_module, which is generating a module intended for dlopen().
+#
+# They differ only slightly:
+# In the former case, we want to package all dependent code into the .so.
+# In the latter case, we want to package just the API exposed by the
+# outermost module.
+# This means shared_library uses --whole-archive, while loadable_module doesn't.
+# (Note that --whole-archive is incompatible with the --start-group used in
+# normal linking.)
+
+# Other shared-object link notes:
+# - Set SONAME to the library filename so our binaries don't reference
+# the local, absolute paths used on the link command-line.
+quiet_cmd_solink = SOLINK($(TOOLSET)) $@
+cmd_solink = $(LINK.$(TOOLSET)) -shared $(GYP_LDFLAGS) $(LDFLAGS.$(TOOLSET)) -Wl,-soname=$(@F) -o $@ -Wl,--whole-archive $(LD_INPUTS) -Wl,--no-whole-archive $(LIBS)
+
+quiet_cmd_solink_module = SOLINK_MODULE($(TOOLSET)) $@
+cmd_solink_module = $(LINK.$(TOOLSET)) -shared $(GYP_LDFLAGS) $(LDFLAGS.$(TOOLSET)) -Wl,-soname=$(@F) -o $@ -Wl,--start-group $(filter-out FORCE_DO_CMD, $^) -Wl,--end-group $(LIBS)
+
+
+# Define an escape_quotes function to escape single quotes.
+# This allows us to handle quotes properly as long as we always use
+# use single quotes and escape_quotes.
+escape_quotes = $(subst ','\'',$(1))
+# This comment is here just to include a ' to unconfuse syntax highlighting.
+# Define an escape_vars function to escape '$' variable syntax.
+# This allows us to read/write command lines with shell variables (e.g.
+# $LD_LIBRARY_PATH), without triggering make substitution.
+escape_vars = $(subst $$,$$$$,$(1))
+# Helper that expands to a shell command to echo a string exactly as it is in
+# make. This uses printf instead of echo because printf's behaviour with respect
+# to escape sequences is more portable than echo's across different shells
+# (e.g., dash, bash).
+exact_echo = printf '%s\n' '$(call escape_quotes,$(1))'
+
+# Helper to compare the command we're about to run against the command
+# we logged the last time we ran the command.  Produces an empty
+# string (false) when the commands match.
+# Tricky point: Make has no string-equality test function.
+# The kernel uses the following, but it seems like it would have false
+# positives, where one string reordered its arguments.
+#   arg_check = $(strip $(filter-out $(cmd_$(1)), $(cmd_$@)) \
+#                       $(filter-out $(cmd_$@), $(cmd_$(1))))
+# We instead substitute each for the empty string into the other, and
+# say they're equal if both substitutions produce the empty string.
+# .d files contain ? instead of spaces, take that into account.
+command_changed = $(or $(subst $(cmd_$(1)),,$(cmd_$(call replace_spaces,$@))),\
+                       $(subst $(cmd_$(call replace_spaces,$@)),,$(cmd_$(1))))
+
+# Helper that is non-empty when a prerequisite changes.
+# Normally make does this implicitly, but we force rules to always run
+# so we can check their command lines.
+#   $? -- new prerequisites
+#   $| -- order-only dependencies
+prereq_changed = $(filter-out FORCE_DO_CMD,$(filter-out $|,$?))
+
+# Helper that executes all postbuilds until one fails.
+define do_postbuilds
+  @E=0;\
+  for p in $(POSTBUILDS); do\
+    eval $$p;\
+    E=$$?;\
+    if [ $$E -ne 0 ]; then\
+      break;\
+    fi;\
+  done;\
+  if [ $$E -ne 0 ]; then\
+    rm -rf "$@";\
+    exit $$E;\
+  fi
+endef
+
+# do_cmd: run a command via the above cmd_foo names, if necessary.
+# Should always run for a given target to handle command-line changes.
+# Second argument, if non-zero, makes it do asm/C/C++ dependency munging.
+# Third argument, if non-zero, makes it do POSTBUILDS processing.
+# Note: We intentionally do NOT call dirx for depfile, since it contains ? for
+# spaces already and dirx strips the ? characters.
+define do_cmd
+$(if $(or $(command_changed),$(prereq_changed)),
+  @$(call exact_echo,  $($(quiet)cmd_$(1)))
+  @mkdir -p "$(call dirx,$@)" "$(dir $(depfile))"
+  $(if $(findstring flock,$(word 1,$(cmd_$1))),
+    @$(cmd_$(1))
+    @echo "  $(quiet_cmd_$(1)): Finished",
+    @$(cmd_$(1))
+  )
+  @$(call exact_echo,$(call escape_vars,cmd_$(call replace_spaces,$@) := $(cmd_$(1)))) > $(depfile)
+  @$(if $(2),$(fixup_dep))
+  $(if $(and $(3), $(POSTBUILDS)),
+    $(call do_postbuilds)
+  )
+)
+endef
+
+# Declare the "all" target first so it is the default,
+# even though we don't have the deps yet.
+.PHONY: all
+all:
+
+# make looks for ways to re-generate included makefiles, but in our case, we
+# don't have a direct way. Explicitly telling make that it has nothing to do
+# for them makes it go faster.
+%.d: ;
+
+# Use FORCE_DO_CMD to force a target to run.  Should be coupled with
+# do_cmd.
+.PHONY: FORCE_DO_CMD
+FORCE_DO_CMD:
+
+TOOLSET := target
+# Suffix rules, putting all outputs into $(obj).
+$(obj).$(TOOLSET)/%.o: $(srcdir)/%.c FORCE_DO_CMD
+	@$(call do_cmd,cc,1)
+$(obj).$(TOOLSET)/%.o: $(srcdir)/%.cc FORCE_DO_CMD
+	@$(call do_cmd,cxx,1)
+$(obj).$(TOOLSET)/%.o: $(srcdir)/%.cpp FORCE_DO_CMD
+	@$(call do_cmd,cxx,1)
+$(obj).$(TOOLSET)/%.o: $(srcdir)/%.cxx FORCE_DO_CMD
+	@$(call do_cmd,cxx,1)
+$(obj).$(TOOLSET)/%.o: $(srcdir)/%.S FORCE_DO_CMD
+	@$(call do_cmd,cc,1)
+$(obj).$(TOOLSET)/%.o: $(srcdir)/%.s FORCE_DO_CMD
+	@$(call do_cmd,cc,1)
+
+# Try building from generated source, too.
+$(obj).$(TOOLSET)/%.o: $(obj).$(TOOLSET)/%.c FORCE_DO_CMD
+	@$(call do_cmd,cc,1)
+$(obj).$(TOOLSET)/%.o: $(obj).$(TOOLSET)/%.cc FORCE_DO_CMD
+	@$(call do_cmd,cxx,1)
+$(obj).$(TOOLSET)/%.o: $(obj).$(TOOLSET)/%.cpp FORCE_DO_CMD
+	@$(call do_cmd,cxx,1)
+$(obj).$(TOOLSET)/%.o: $(obj).$(TOOLSET)/%.cxx FORCE_DO_CMD
+	@$(call do_cmd,cxx,1)
+$(obj).$(TOOLSET)/%.o: $(obj).$(TOOLSET)/%.S FORCE_DO_CMD
+	@$(call do_cmd,cc,1)
+$(obj).$(TOOLSET)/%.o: $(obj).$(TOOLSET)/%.s FORCE_DO_CMD
+	@$(call do_cmd,cc,1)
+
+$(obj).$(TOOLSET)/%.o: $(obj)/%.c FORCE_DO_CMD
+	@$(call do_cmd,cc,1)
+$(obj).$(TOOLSET)/%.o: $(obj)/%.cc FORCE_DO_CMD
+	@$(call do_cmd,cxx,1)
+$(obj).$(TOOLSET)/%.o: $(obj)/%.cpp FORCE_DO_CMD
+	@$(call do_cmd,cxx,1)
+$(obj).$(TOOLSET)/%.o: $(obj)/%.cxx FORCE_DO_CMD
+	@$(call do_cmd,cxx,1)
+$(obj).$(TOOLSET)/%.o: $(obj)/%.S FORCE_DO_CMD
+	@$(call do_cmd,cc,1)
+$(obj).$(TOOLSET)/%.o: $(obj)/%.s FORCE_DO_CMD
+	@$(call do_cmd,cc,1)
+
+
+ifeq ($(strip $(foreach prefix,$(NO_LOAD),\
+    $(findstring $(join ^,$(prefix)),\
+                 $(join ^,pty.target.mk)))),)
+  include pty.target.mk
+endif
+
+quiet_cmd_regen_makefile = ACTION Regenerating $@
+cmd_regen_makefile = cd $(srcdir); /usr/share/node-gyp/gyp/gyp_main.py -fmake --ignore-environment "--toplevel-dir=." -I/home/pi/VSoRC/node_modules/node-pty/build/config.gypi -I/usr/share/node-gyp/addon.gypi -I/usr/include/nodejs/common.gypi "--depth=." "-Goutput_dir=." "--generator-output=build" "-Dlibrary=shared_library" "-Dvisibility=default" "-Dnode_root_dir=/usr/include/nodejs" "-Dnode_gyp_dir=/usr/share/node-gyp" "-Dnode_lib_file=node.lib" "-Dmodule_root_dir=/home/pi/VSoRC/node_modules/node-pty" binding.gyp
+Makefile: $(srcdir)/../../../../../usr/include/nodejs/common.gypi $(srcdir)/build/config.gypi $(srcdir)/binding.gyp $(srcdir)/../../../../../usr/share/node-gyp/addon.gypi
+	$(call do_cmd,regen_makefile)
+
+# "all" is a concatenation of the "all" targets from all the included
+# sub-makefiles. This is just here to clarify.
+all:
+
+# Add in dependency-tracking rules.  $(all_deps) is the list of every single
+# target in our tree. Only consider the ones with .d (dependency) info:
+d_files := $(wildcard $(foreach f,$(all_deps),$(depsdir)/$(f).d))
+ifneq ($(d_files),)
+  include $(d_files)
+endif